eom

Etch-O-Matic Site Pages

Home PageTool & Part MarkingKnife MarkingDura-Film StencilsStencil/Combo KitsSign-O-MaticLabel MakersMark 440 Stencil MakerMark 560 Stencil MakerMark 680 Stencil MakerMark 1000 Stencil MakerRecognition AwardsSite Map
FAQ-ARTWORK

Quick Ordering

Price List

 Martronics Company Links

Affiliates InfoWho Uses EOMGlass EtchingArt Rubber StampsCraft StencilsVideo Tutorials

 

Contact US

P.O. Box 200 / 500 Wilcox Road
Salkum, WA 98582

Email - Click Here

Phone: 1.800.775.0797
Fax: 1.360.985.2996

We've been in business for over 41 years.
~~~
Etch-O-Matic is a Trademark of
Martronics Corp.
~~~
2007 Martronics Corporation

Permanently Marks Knives In Seconds!

ETCH-O-MATIC
MARKS KNIVES, SWORDS & CUTLERY
WITH YOUR COPY, DESIGNS OR TRADEMARKS    
IN SECONDS FOR PENNIES!



Video Below:
Here's A Preview Of What The Etch-O-Matic Can Do For You!


Here Is How You Mark A Knife

Here Are Examples Of Electro-Chemical Marking That You Can Easily Do In 
 Your Own Shop In Just Seconds!  Now All You Do Is Create Your Own Design,
 Logo, Trademark Or Brand Name And Then Put It On Your Knives, Swords, Cutlery, Multi-Tools, Or Leatherman Tools For Less Than A Cent Per Mark. 
 It Is Easy, Quick, Cheap, Professional And YOU Can Do It...In Seconds! 

You Do This By Using The ETCH-O-MATIC And Any Of Our Dura-Film 
Stencil Maker
s
(As Shown Below) To Create Your Own Trademark Stencils
 In Less Than 5 Minutes!  Simply Follow The Page On Down And See The
 Whole Process Explained In Detail.  Here Are A Few Examples To Show 
You What The Marks Look Like.

Here Are Examples Of Permanent Electro-Chemical Marks.

Cutlery

knife      knife

 Create Any Design, Trademark Or Brand Name And Etch It On Your Knives In Seconds!

knife

knife

You Can Make Black Marks On Stainless Steel, White Marks On Black Oxide Coatings And Even Deep Etch Marks Down To About 0.003" That Can Be Clear Or Black.

knife knife

Here Is A Sword And The Dura-Film Stencil That Was Used To Mark It In 3 Seconds.

knife

Now Mark Swords, Daggers, Knives, Cutlery And Anything Metal Including Tools, Instruments, Metal Parts And Equipment With Marks You Create In Just Seconds For Pennies.  The Etch-O-Matic Can Be Used In Hundreds Of Ways For Fun And Profit.  

 
 
Video Below: See How To Mark Knives In Seconds!
 
 

  Here Is A Quick Summary On The Etch-O-Matic:

PERMANENTLY MARKS ANYTHING METAL IN SECONDS!

ETCHES MARK INTO SURFACE ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

eom

eom

MARKING WITH GROUND PLATE Simply Lay the Tool or Part on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief Seconds and Your Mark is Permanently Etched Into the Surface. MARKING ROUND SURFACES Drill Bits, Milling Cutters, Tubing, Pipe or nearly anything Round can be Easily Marked by "Rolling" the Mark on as Shown Above.

FAST AND VERY EASY TO USE!

ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today!  Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

eom

eom

MAKES DEEP ETCH MARKS ETCH-O- MATIC Marks many Metals as Deep as .003" with Deep Etch Adapter Clip, a Mark that can only be Removed by Grinding a Major Part of the Surface Away. BASICALLY, ETCH-O-MATIC and the Electro-Chemical Marking System has been Proven Over and Over again during our 36 Years in Business as the Best Way to Permanently Mark Anything Metal.  

COMPARES WITH LASER MARKS

Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make.  In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today.  If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic.  In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle.  (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)


EXAMPLES OF ETCH-O-MATIC MARKS

Black Mark
Etch-O-Matic makes a Black Mark on almost any metal.
Deep Mark
Etch-O-Matic makes a Clear Deep Etch to .003" on metals.
Deep Black Mark
Etch-O-Matic makes a Deep Etch Black Mark on metal.
Frosty Mark
Etch-O-Matic makes a Frosty Mark on mirror finish metal.

MAKING DURA-FILM STENCILS
Here is How You Make Your Dura-Film Stencils In About 3 Minutes.
(NOTE: We Are Using Large Type So It Will Photograph Easily.)
 

computer Your Artwork...First Make Your Copy On Your Computer. Here Is A Simple A B C Made Large To Show In The Photo.You Can Make Any Line Drawing, Logo, Trademark or Simple Message You Wish. There Is Not Much Limit Except Photos Are Difficult And Very Thin Lines Are Hard To Mark.
transparency Transparency...Next Print Out Your Copy On A Transparency (Which Comes In The Kit) And Place The Transparency Copy On A Piece Of Unexposed Dura-Film Stencil (Which Comes In The Kit) And Finally Place A Glass Plate On Top.
exposure unit U.V. Exposure Unit...Next Place Tray In The 440 Dura-Film Stencil Maker And Turn On Exposure Unit For About 3 Minutes.
developer Develop Your Stencil...Next Remove Stencil And Develop For 30 Seconds To A Minute. Stencil Is Then Ready To Use To Mark Your Knives Or Anything Metal.
finished stencil Permanently Marked...Here We Are Marking A Saw Blade Since It Is Large Enough To Make A Good Photo. You Simply Lay The Stencil On The Blade, Wet The Etch-O-Matic Pad (On Bottom) With Electrolyte, Then Place The Etch-O-Matic On The Stencil, Ground For A Few Seconds And Then Remove And Your Blade Is Permanently Marked.

Note: New Universal Stencils are Now Included in Your Kits!
Remember - You Can Etch, Print or Paint on Almost Anything.


Video Below: Explanation Of The Starter & Super Etch-O-Matic Kits

 

Here Are The Most Popular Etch-O-Matic Kits
Combined BELOW With The New STENCIL MAKERS For

SPECIAL COMBO OFFERS YOU MUST SEE!

Etch-O-Matic Starter Kit

Lowest Priced Kit available Anywhere, Yet it Does the Job in Industry, in Plants, Machine Shops and Everywhere Metal Marking is needed.  The Marker Unit is 10 volts, 2 amps and is Excellent for Light Duty Marking of Tools and Parts.  (Transformer is inside marker unit) 

KIT CONTAINS:
ETCH-O-MATIC marker with standard head marking size 7/8" x 13/4", electrical cord, ground plate, 2 oz. Electrolyte solution in plastic bottle, 10 special stencils, neutralizer, deep etching adapter clip and complete instructions. Each kit will make approximately 1,000 marks before refill supplies are needed.

Unit is 110 Volts standard, but is available in 220 volts for $20 more.

eom

Industrial Price...$119.95
Only $79.95 ON SPECIAL TODAY!
Save $40.00 Today!
 


Only $79.95 TODAY!

Etch-O-Matic Super Kit
HEAVY DUTY... INDUSTRIAL QUALITY
BEST VALUE ON THE MARKET TODAY!

NEW SUPER ETCH-O-MATIC is a Powerful, 15-Volt, 10-Amp, Heavy Duty, Industrial Quality Marking System that can Stand Up to Continuous Duty, Production Line Marking. It can make Fast A.C. Marks, then Change Instantly to Deep Etch Marking Down to .003" Deep. It can make Large Marks 2" x 4" or Larger (with optional purchase of  Medium or Large Grid Kits) for Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly. This is a Solid, "No Frills" Etcher that is Priced $200 to $300 BELOW Similar Kits on the Market Today.

KIT CONTAINS:
1 - 15-volt, 10-amp. marker unit with external transformer; adapter clip for deep etch marking; ground plate; 8-oz. general purpose electrolyte; 8-oz. neutralizer; extra pads; 100 pak special stencils; complete instructions and packed in sturdy plastic carrying case.

Unit is 110 Volts standard, but is available in 220 volts for $20 more.

eom kit

Industrial Price $299.95
Only $229.95 ON SPECIAL TODAY! 

You SAVE $70.00 Today!
 


Only $229.95 TODAY!

SUPER INDUSTRIAL KIT

THE NEW SUPER ETCH-O-MATIC INDUSTRIAL KIT Combines the Best of Both of the TWO Kits Above and gives You enough Supplies to Mark Almost Any Type of Metal in the Average Plant. It also provides Great Value Because You get the Starter Kit 10-volt / 2-amp Unit Included FREE in the Kit.   Also Included is a Large 2" x 4" Grid that Allows You to Mark Much Larger Areas at the Same Time.   THIS IS REALLY A SUPER VALUE AT THIS LOW PRICE!

KIT CONTAINS:
1 Super and 1 Regular ETCH-O-MATIC marker along with an adapter clip for deep etch marking, ground plate, 8 oz general purpose and stainless steel electrolyte, two (2) 100 paks stencils, 4 oz. of aluminum, black oxide, and brass, copper & bronze electrolyte, 1 large 2" x 4" grid with stencils and pads to fit, 8 oz. neutralizer, 2 neutralizer powder paks, 1 extra regular grid and complete instructions.

Unit is 110 Volts standard, but is available in 220 volts for $20 more.

eom kit

Industrial Price $399.95
Only $329.95 ON SPECIAL TODAY! 

You SAVE $100.00 Today!
 


Only $329.95 TODAY!

 

stencil maker kit
 

440 STENCIL MAKER KIT CONTENTS

  • 1 UV Exposure Unit in Aluminum Frame Measuring 5"x6"x12" High with Electric Cord, Switch and Special 365 Nanometer Ultra-Violet Bulb (120 Watts)
  • 1 Aluminum Exposure Tray with Compression Foam and Glass Top
  • 1-16oz. Bottle Stencil Developer
  • 1 Plastic Developing Tray with Lid
  • 2 White Developer Sponges
  • 1 Digital Timer
  • 10 Unexposed Universal Stencils 5"x6"
  • 2 FREE Samples of Universal Stencils FOR PRACTICE
  • 5 Sheets Transparency Film For Your Copy (8 1/2"x 11")
  • 1 Sample Glass Etching Kit with Etching Cream
  •  Complete Instructions
    ****
    NOTE: 440 Stencil Maker is Only Available In 110 Volt Configuration.****
    ****If You Use 220 Volts You Will Need a Step Down Transformer.****   

Regular Price $249.95
(You Save $80.00 TODAY) ONLY $169.95 TODAY

ON SPECIAL TODAY $169.95  
We Do NOT Guarantee This Price Will Be Available Tomorrow! Today's SPECIAL PRICE...DON'T MISS IT!

 
Now You Can Combine The Two Etch-O-Matic Kits Above With
The Mark 440 Stencil Maker Into A COMBO KIT Shown Below
And Receive Even Greater SPECIAL DISCOUNTS FOR TODAY!
YOUR SAVINGS TODAY ARE $150.00 ON THE COMBO KITS!
(Also You Will Qualify For The Special 20% Next Order Discount!)
 
Video Below: Explanation Of Combo-Kits
 
 

MARK 440 U.V. STENCIL MAKER &
ETCH-O-MATIC STARTER KIT COMBO

Mark 440/Etch-O-Matic Starter Kit Combo $229.95 TODAY! Please Specify Laser or Inkjet
Transparency Sheets.
Kit Contains: Includes Everything in MARK 440 UV Stencil Maker Kit PLUS the Etch-O-Matic Starter Kit. You Save $100.00 On The Mark 440 And $50.00 On the Starter Kit for A Total Savings Today Of $140.00 Off The Industrial Price and $20.00 Off Today's Sales Price (Also, You Will Get a 20% Special Discount Coupon for Savings On Your Very Next Order for Kits or Supplies.) 

MARK 440 U.V. STENCIL MAKER &
SUPER ETCH-O-MATIC KIT COMBO

Mark 440/Etch-O-Matic Super Kit Combo $349.95  TODAY! Please Specify Laser or Inkjet
Transparency Sheets.
Kit Contains:  Includes Everything in MARK 440 UV Stencil Maker Kit PLUS the Super Etch-O-Matic Kit. You Save $100.00 On The Mark 440 And $50.00 On the Super Kit for Total Savings Today Of $200.00 Off The Industrial Price and $50.00 Off Today's Sales Price. (Also, You Will Get a 20% Special Discount Coupon for Savings On Your Very Next Order for Kits or Supplies.


IMPORTANT NOTE:
With Each Combo Kit ( Etch-O-Matic & Stencil Maker Combined)
Purchased Today You Will Receive A 20% Discount Coupon
For Etch-O-Matic Kits Or Supplies
ON YOUR VERY NEXT ORDER (NOT THIS ORDER)
We Do NOT Guarantee This Offer Will Be Available Tomorrow!
DON'T MISS THIS SPECIAL OFFER TODAY!

 

coupon

Today's Special - 20% Coupon Included in COMBO KITS!

Martronics Corporation is an Expert in
Marking Metal and Etching Metal, Multi-Tools, Craft-Stencils, and Making Rubber Stamps.

Save Money on Your Auto Insurance.
Click Here to See Our VIN Etching Kits On Sale for $14.95.

Our New Glass Etching Kits Let You Put Your Artwork On Glass In Minutes.


MARTRONICS CORPORATION
ETCH-O-MATIC     SIGN-O-MATIC
Martronics Makers of Etch-O-Matic Electrochemical or Electro-Chemical, Marking Devices, Can Answer All Of Your Marking Problems Regarding Marking Metal, Etching Metal, Tool Marking, Die Marking, Electrolytic Etching, Electrolytic Marking, Parts Marking, Metal Marking Machines, Product Marking, Marking Systems, Etching Knives, Acid Etch, Acid Etching, Dura-Film Stencils, Sign-O-Matic or Signomatic, Signs, Metal Signs, Decals, Polyester Decals, Tags, Metal Tags, Panel Fronts, lnsta-Mark Labels, or Instamark Labels, Ultra-Violet Exposure Units, Ultraviolet Exposure Units, Marking Devices, Mark 440, Mark 560 or Mark 680, Mark 1000, U.V. Exposure Units, Marking Machinery, Etch-Mark, Chem-Etch, Monode, Marking Methods, Electromark,  Photochemical Etching, Etchmark, Chemical Etching, or Etchomatic.